| Welcome to ceiling Fans Forums | Monday, January 05, 2009 |
| General \ General chat & feedback \ HUNTER ORIGINAL DISASSEMBLY | ||||||
| Author | Messages | Date Posted | ||||
| DANIEL | HAVE A HUNTER ORIGINAL FROM THE 1970'S THAT IS IN SOME SERIOUS NEED OF A GOOD CLEANING AND POSSIBLY NEW BEARINGS. ANY HINTS ON DISASSEMBLY WOULD BE GREATLY APPRECIATED. THANKS FOR YOUR TIME DAN | 9/16/2008 5:21:44 PM |
||||
| cfanrepair |
Remove the cover from the bottom with two screws. Disconnect all wires, making note of where they go. Remove the pullchain and any other parts. Uncrew that entire tube at the bottom-- it is reverse threaded so you turn it the opposite way. Once unscrewed, you have access to the bearings. Clean them WD40 and then fill the fan with 10wt non detergent motor oil. If this doesnt free it up, or if the oil is not reaching the bearings, you will have to take it apart further. |
9/19/2008 2:23:26 PM |
||||
Home | Login | Register | Doc | About | Privacy Policy | Terms of Use | Contact Us
616 Guests Online and 63 Users Online
Spread the word out about "Ceiling Fans 'N More Forums" by Tell a Friend! feature.
Web Buzz | Content Management