Ceiling Fan Help \ Ceiling Fan Problems \  Harbor Breeze fan just stopped working Welcome to ceiling Fans Forums
Saturday, May 19, 2012
Ceiling Fan Help \ Ceiling Fan Problems \ Harbor Breeze fan just stopped working
spschritt Posted on 11/3/2008 10:05:37 PM
I have a Harbor Breeze Aero fan purchased in 2004 that has worked perfectly until recently. The wall switch lights up when pushed and there's power to the fan, having check the wires with a voltage meter. This is a fan only, no light. There were no warning signs or noise before it just quit. Any ideas?
cfanrepair Posted on 11/4/2008 12:02:26 PM
Is it an RF wall switch? Is there a receiver in the fan? If you dont know, open it up at the ceiling and find out.
spschritt Posted on 11/5/2008 6:25:18 PM
The fan is wired direct, no remote.
cfanrepair Posted on 11/5/2008 11:19:29 PM
What type of wall switch does it use? What buttons does the wall switch have.
spschritt Posted on 11/11/2008 10:09:24 PM
The wall switch has buttons for on/off, speeds, reverse, light, and a slide switch for on/off.
cfanrepair Posted on 11/12/2008 8:00:31 PM
That's an RF wall switch. You will need to replace either the switch or the receiver or both. Contact Harbor Breeze for replacement parts.
spschritt Posted on 11/13/2008 5:40:49 PM
Thank you. I assume RF means radio frequency? I thought the fan's operation was all controlled by hard wire. There is a black box that's about 2" x 4" x 1/2" located just below the junction box at the ceiling. Is that the receiver?
cfanrepair Posted on 11/17/2008 6:30:09 PM
If the wall switch has a reverse function then it's RF. The black box is the receiver.
Username: Password:   
Home | Login | Register | Doc | About | Privacy Policy | Terms of Use | Contact Us
440 Guests Online and 45 Users OnlineCopyright (R) 2006-2012 to ceiling Fan Forums. All rights reserved.
Spread the word out about "Ceiling Fans 'N More Forums" by Tell a Friend! feature.
Casablanca Ceiling Fans | Rustic Ceiling Fans | Content Management